home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
FishMarket 1.0
/
FishMarket v1.0.iso
/
fishies
/
126-150
/
disk_141
/
sbprolog
/
zoo.man
< prev
Wrap
Text File
|
1992-05-06
|
28KB
|
663 lines
ZOO(1) UNIX Programmer's Manual ZOO(1)
NAME
zoo - manipulate archives of files in compressed form
SYNOPSIS
zoo {acDehlLPTuUvx}[cdEfInMNoOpPquv1:./@] archive [file] ...
zoo -command archive [file] ...
zoo h
DESCRIPTION
^[[4mZoo^[[m is used to create and maintain collections of files in
compressed form. It uses a Lempel-Ziv compression algorithm
that gives space savings in the range of 20% to 80% depend-
ing on the type of file data.
The command ^[[4mzoo^[[m h gives summary of commands.
^[[4mZoo^[[m will not add an archive to itself, nor add the archive's
backup (with .bak extension to the filename) to the archive.
^[[4mZoo^[[m has two types of commands: Expert commands, which con-
sist of one command letter followed by zero or more modifier
characters, and Novice commands, which consist of a hyphen
(`-') followed by a command word that may be abbreviated.
Expert commands are case-sensitive but Novice commands are
not.
When ^[[4mzoo^[[m adds a file to an existing archive, it marks as
deleted any already-archived file with the same name.
(Directory prefixes are significant in this comparison if
and only if directory names are being stored.) Deleted files
may be later undeleted. Archives may be packed to recover
space occupied by deleted files.
All commands assume that the archive name ends with the
characters .zoo unless a different extension is supplied.
Novice commands
Novice commands may be abbreviated to a hyphen followed by
at least one command character. Each Novice command works
in two stages. First, the command does its intended work.
Then, if the result was that one or more files were deleted
in the specified archive, the archive is packed. If packing
occurs, the original unpacked archive is always left behind
with an extension of .bak.
No Novice command ever stores the directory prefix of a
file. When a Novice command is used to add a file to an
archive, any already-archived file with the same name,
regardless of the directory prefix, is marked deleted.
Printed 9/14/87 Aug 28, 1987 1
ZOO(1) UNIX Programmer's Manual ZOO(1)
The Novice commands are as follows.
-add Adds the specified files to the archive.
-freshen
Adds a specified file to the archive if and only if an
older file by the same name already exists in the
archive.
-delete
Deletes the specified files from the archive.
-update
Adds a specified file to the archive either: if an
older file by the same name already exists in the
archive or: if a file by the same name does not
already exist in the archive.
-extract
Extracts the specified files from the archive. If no
file is specified all files are extracted.
-move
Equivalent to -add except that source files are deleted
after addition.
-print
Equivalent to -extract except that extracted data are
sent to standard output.
-list
Gives information about the specified archived files
including any attached comments. If no files are
specified all files are listed. Deleted files are not
listed.
-test
Equivalent to -extract except that the extracted data
are not saved but any errors encountered are reported.
-comment
Allows the user to add or update comments attached to
archived files. When prompted, the user may: type a
carriage return to skip the file, leaving any current
comment unchanged; or type a (possibly null) comment
of up to 65,535 characters terminated by /end (case-
insensitive) on a separate line; or type the end-of-
file character (normally control D) to skip all remain-
ing files.
-delete
Deletes the specified files.
Printed 9/14/87 Aug 28, 1987 2
ZOO(1) UNIX Programmer's Manual ZOO(1)
The correspondence between Novice and Expert commands is as follows.
Novice Equivalent
Command Description Expert Command
_______________________________________________________________________
-add add files to archive aP:
-extract extract files from archive x
-move move files to archive aMP:
-test test archive integrity xNd
-print extract files and send to standard output xp
-delete delete files from archive DP
-list list information about archived files v
-update update archive by adding new or newer files aunP:
-freshen freshen archive by adding newer files auP:
-comment allows user to attach comments to files c
Expert commands
The general format of expert commands is:
^[[4mzoo^[[m {acDehlPTuUvx}[cdEfInMNoOpPquv1:./@] archive [file] ...
The characters enclosed within {} are commands. Choose any
one of these. The characters enclosed within [] just to the
right of the {} are modifiers and zero or more of these may
immediately follow the command character. All combinations
of command and modifier characters may not be valid.
Files are added to an archive with the command:
^[[4mzoo^[[m {au}[cfIMnPqu:] archive [file] ...
Command characters are:
a Add each specified file to archive. Any already-
archived file with the same name is marked as deleted.
u Do an update of the archive. A specified file is added
to the archive only if a copy of it is already in the
archive and the copy being added is newer than the copy
already in the archive.
The following modifiers are specific to these commands.
M Move files to archive. This makes ^[[4mzoo^[[m delete (unlink)
the original files after they have been added to the
archive. Files are deleted after addition of all files
to the archive is complete and after any requested
packing of the archive has been done, and only if ^[[4mzoo^[[m
detected no errors.
Printed 9/14/87 Aug 28, 1987 3
ZOO(1) UNIX Programmer's Manual ZOO(1)
n Add new files only. A specified file is added only if
it isn't already in the archive.
P Pack archive after files have been added.
u Applied to the a command, this modifier makes it behave
identically to the u command.
The combination of the n modifier with the u modifier
or u command causes addition of a file to the archive
either if the file is not already in the archive, ^[[4mor^[[m if
the file is already in the archive but the archived
copy is older than the copy being added.
: Do not store directory names. In the absence of this
modifier ^[[4mzoo^[[m stores the full pathname of each archived
file.
I Read filenames to be archived from standard input. ^[[4mZoo^[[m
will read its standard input and assume that each line
of text contains a filename. Under AmigaDOS and the
**IX family, the entire line is used. Under MS-DOS and
VAX/VMS, ^[[4mzoo^[[m assumes that the filename is terminated by
a blank, tab, or newline; thus it is permissible for
the line of text to contain more than one field
separated by white space, and only the first field will
be used.
Under the **IX family of operating systems, ^[[4mzoo^[[m can be
used as follows in a pipeline:
find . -print | zoo aI sources
If the I modifier is specified, no filenames may be
supplied on the command line itself.
Files are extracted from an archive with the command:
^[[4mzoo^[[m {ex}[dNoOpq./@] archive [file] ...
The e and x commands are synonymous. If no file was speci-
fied, all files are extracted from the archive.
The following modifiers are specific to the e and x com-
mands:
N Do not save extracted data but report any errors
encountered.
Printed 9/14/87 Aug 28, 1987 4
ZOO(1) UNIX Programmer's Manual ZOO(1)
O Overwrite files. Normally, if a file being extracted
would overwrite an already-existing file of the same
name, ^[[4mzoo^[[m asks you if you really want to overwrite it.
You may answer the question with `y', which means yes,
overwrite; or `n', which means no, don't overwrite; or
`a', which means assume the answer is `y' for this and
all subsequent files. The O modifier makes ^[[4mzoo^[[m assume
that files may always be overwritten.
The O, N, and p modifiers are mutually exclusive.
o This is equivalent to the O modifier if and only if it
is given at least twice. It is otherwise ignored.
p Pipe extracted data to standard output. Error messages
are piped to standard output as well. However, if a
bad CRC is detected, an error message is sent both to
standard error and to standard output.
/ Extract to original pathname. Any needed directories
must already exist. In the absence of this modifier
all files are extracted into the current directory. If
this modifier is doubled as //, needed directories need
not exist and are created if necessary.
Archived files are listed with the command:
^[[4mzoo^[[m {lLv}[adfqv@/1] archive[.zoo] [file] ...
l Information presented includes the date and time of
each file, its original and current (compressed) sizes,
and the percentage size decrease due to compression
(labelled CF or compression factor). If a file was
added to the archive in a different timezone, the
difference between timezones is shown in hours as a
signed number. As an example, if the difference is
listed as +3, this means that the file was added to the
archive in a timezone that is 3 hours west of the
current timezone. The file time listed is, however,
always the original timestamp of the archived file, as
observed by the user who archived the file, expressed
as that user's local time.
If no filename is supplied all files are listed except
deleted files.
L This is identical to the l command except that all sup-
plied arguments must be archives and the contents of
each are listed.
v This causes a verbose listing, which additionally shows
any comment attached to each file. Using the v
Printed 9/14/87 Aug 28, 1987 5
ZOO(1) UNIX Programmer's Manual ZOO(1)
modifier with the l command has the same effect.
In addition to the general modifiers described later, the
following modifiers can be applied to the archive list com-
mands.
a This gives a single-line format containing both each
filename and the name of the archive, sorted by archive
name. It is especially useful with the L command,
since the result can be further sorted on any field to
give a master listing of the entire contents of a set
of archives.
1 This forces one filename to be listed per line. It is
most useful in combination with the f modifier.
/ This forces any directory name to be always listed,
even in fast columnized listings that do not normally
include any directory names.
Files may be deleted and undeleted from an archive with the
following commands:
^[[4mzoo^[[m {DU}[Pq1] archive file ...
The D command deletes the specified files and the U command
undeletes the specified files. The 1 modifier (the digit
one, not the letter ell) forces deletion or undeletion of at
most one file. If multiple instances of the same file exist
in an archive, use of the 1 modifier may allow selective
extraction of one of these.
Comments may be added to an archive with the command:
^[[4mzoo^[[m c archive
This behaves identically to the -comment command.
The timestamp of an archive may be adjusted with the com-
mand:
^[[4mzoo^[[m T[q] archive
^[[4mZoo^[[m normally attempts to maintain the timestamp of an
archive to reflect the age of the newest file stored in it.
Should the timestamp ever be incorrect it can be fixed with
the T command.
An archive may be packed with the command:
^[[4mzoo^[[m P[EPq] archive
Printed 9/14/87 Aug 28, 1987 6
ZOO(1) UNIX Programmer's Manual ZOO(1)
If the backup copy of the archive already exists, ^[[4mzoo^[[m will
refuse to pack the archive unless the P modifier is also
given. The E modifier causes ^[[4mzoo^[[m not to save a backup copy
of the original archive after packing. A unique temporary
file in the current directory is used to initially hold the
packed archive. This file will be left behind if packing is
interrupted or if for some reason this file cannot be
renamed to the name of the original archive when packing is
complete.
Packing removes any garbage data appended to an archive
because of Xmodem file transfer and also recovers space used
by comments that were replaced.
General modifiers
The following modifiers are applicable to several commands:
c Applied to the a and u commands, this causes the user
to be prompted for a comment for each file added to the
archive. If the file being added has replaced a file
already in the archive, any comment attached to the
replaced file is shown to the user and becomes attached
to the newly-added file unless the user changes it.
Possible user responses are as described for the -com-
ment command. Applied to the archive list command l,
the c modifier causes the listing of any comments
attached to archived files.
. In conjunction with / or // this modifier causes any
extracted pathname beginning with `/' to be interpreted
relative to the current directory, resulting in the
possible creation of a subtree rooted at the current
directory. In conjunction with the command P the .
modifier causes the packed archive to be created in the
current directory. This is intended to allow users
with limited disk space but multiple disk drives to
pack large archives.
d Most commands that act on an archive act only on files
that are not deleted. The d modifier makes commands
act on both normal and deleted files. If doubled as
dd, this modifier forces selection only of deleted
files.
f Applied to the a and u commands, the f modifier causes
fast archiving by adding files without compression.
Applied to l it causes a fast listing of files in a
multicolumn format.
q Be quiet. Normally ^[[4mzoo^[[m lists the name of each file and
what action it is performing. The q modifier
Printed 9/14/87 Aug 28, 1987 7
ZOO(1) UNIX Programmer's Manual ZOO(1)
suppresses this. When files are being extracted to
standard output, the q modifier suppresses the header
preceding each file. When archive contents are being
listed, this modifier suppresses any header and
trailer. When a fast columnized listing is being
obtained, this modifier causes all output to be com-
bined into a single set of filenames for all archives
being listed.
Error messages are never suppressed.
@ Extract or list beginning at position n, where n is a
decimal number following the @ sign without any inter-
vening spaces. This may be used to recover data from a
damaged archive by skipping the damaged part. The
number specified must be the position within the
archive of an undamaged directory entry. This position
is usually obtained from ^[[4mfiz^[[m(^[[4m1^[[m).
Wildcard handling
Under the **IX family of operating systems, the shell nor-
mally expands wildcards to a list of matching files. Wild-
cards that are meant to match files within an archive must
therefore be escaped or quoted. When selecting files to be
added to an archive, wildcard conventions are as defined for
the shell. When selecting files from within an archive,
wildcard handling is done by ^[[4mzoo^[[m as described below.
Under MS-DOS and AmigaDOS, quoting of wildcards is not
needed. All wildcard expansion of filenames is done by ^[[4mzoo^[[m,
and wildcards inside directory names are expanded only when
listing or extracting files but not when adding them.
The wildcard syntax interpreted by ^[[4mzoo^[[m is limited to the
following characters.
* Matches any sequence of zero or more characters.
? Matches any single character.
Arbitrary combinations of * and ? are allowed.
/ If a supplied pattern contains a slash anywhere in it,
then the slash separating any directory prefix from the
filename must be matched explicitly. If a supplied
pattern contains no slashes, the match is selective
only on the filename.
c-c Two characters separated by a hyphen specify a charac-
ter range. All filenames beginning with those charac-
ters will match. The character range is meaningful
Printed 9/14/87 Aug 28, 1987 8
ZOO(1) UNIX Programmer's Manual ZOO(1)
only by itself or preceded by a directory name. It is
not specially interpreted if it is part of a filename.
MS-DOS users should note that ^[[4mzoo^[[m does not treat the dot as
a special character, and it does not ignore characters fol-
lowing an asterisk. Thus * matches all filenames; *.*
matches filenames containing a dot; *_* matches filenames
containing an underscore; and *z matches all filenames that
end with the character z, whether or not they contain a dot.
FILES
xXXXXXX - temporary file used during packing
archive_name.bak - backup of archive
SEE ALSO
compress(1), fiz(1)
BUGS
Standard input cannot be archived nor can a created archive
be sent to standard output. Spurious error messages may
appear if the filename of an archive is too long.
Since ^[[4mzoo^[[m never archives any file with the same name as the
archive or its backup (regardless of any path prefixes),
care should be taken to make sure that a file to be archived
does not coincidentally have the same name as the archive it
is being added to. It usually suffices to make sure that no
file being archived is itself a ^[[4mzoo^[[m archive. (Previous ver-
sions of zoo sometimes tried to add an archive to itself.
This bug now seems to be fixed.)
Only regular files are archived; directories and devices are
not.
Early versions of MS-DOS have a bug that prevents "." from
referring to the root directory; this leads to anomalous
results if the extraction of paths beginning with a dot is
attempted.
VAX/VMS destroys case information unless arguments are
enclosed in double quotes. For this reason if a command
given to ^[[4mzoo^[[m on a VAX/VMS system includes any uppercase
characters, it must be enclosed in double quotes. Under
VAX/VMS, ^[[4mzoo^[[m does not currently restore file timestamps;
this will be fixed as soon as I figure out RMS extended
attribute blocks, or DEC supplies a utime() function, which-
ever occurs first. Other VMS bugs, related to file struc-
tures, can often be overcome by using the program ^[[4mbilf^[[m.^[[4mc^[[m
that is supplied with ^[[4mzoo^[[m.
It is not currently possible to create a ^[[4mzoo^[[m archive con-
taining all ^[[4mzoo^[[m archives that do not contain themselves.
Printed 9/14/87 Aug 28, 1987 9
ZOO(1) UNIX Programmer's Manual ZOO(1)
DIAGNOSTICS
Error messages are intended to be self-explanatory and are
divided into three categories. WARNINGS are intended to
inform the user of an unusual situation, such as a CRC error
during extraction, or -freshening of an archive containing a
file newer than one specified on the command line. ERRORS
are fatal to one file, but execution continues with the next
file if any. FATAL errors cause execution to be aborted.
The occurrence of any of these causes an exit status of 1.
Normal termination without any errors gives an exit status
of 0.
FUTURE DIRECTIONS
A revised version of ^[[4mzoo^[[m is in the works which will allow
numbering of multiple versions of a file and automatically
perform end-of-line conversion for text files moved between
dissimilar systems. It will be upward and downward compati-
ble with existing versions of ^[[4mzoo^[[m.
THANKS
Thanks are due to:
Paul Homchick, who provided numerous detailed reports about
some nasty bugs.
Bill Davidsen, who fixed ^[[4mzoo^[[m'^[[4ms^[[m handling of daylight savings
time and also provided changes to make this manual format
correctly with ^[[4mtroff^[[m.
AUTHOR
Rahul Dhesi
Printed 9/14/87 Aug 28, 1987 10
echo shar: "92 control characters may be missing from 'zoo.man'"